Filter
Top Products
87
English
INFORMATION
Information
Before connecting any external equipment, turn off all main power switches. If there is no
switch, remove the mains plug from the wall socket.
Signal information for Mini D-sub 15 pin connector
* NC = not connected
Acceptable PC signals through the PC terminal
The PC input on this TV only accepts signal formats which are compliant with VESA-DMT as shown
in the table below. Since some PCs input signals which are different from the resolution and
frequency described in the table below, the following phenomenon may occur; incorrect display,
false format detection, picture position failure, blur, or judder. In this case, set the monitor output
format on your PC to conform to a signal in the table below.
Pin No. Signal name Pin No. Signal name Pin No. Signal name
1 R 6 Ground 11 NC
2 G 7 Ground 12 DDC Data
3 B 8 Ground 13 H-sync
4 NC* 9 +5V 14 V-sync
5 Ground 10 Ground 15 DDC Clock
Format Resolution V. Frequency H. Frequency Pixel Clock Frequency
VESA Standard
(DMT)
VGA 640 × 480 59.940 Hz 31.469 kHz 25.175 MHz
72.809 Hz 37.861 kHz 31.500 MHz
75.000 Hz 37.500 kHz 31.500 MHz
SVGA 800 × 600 56.250 Hz 35.156 kHz 36.000 MHz
60.317 Hz 37.879 kHz 40.000 MHz
72.188 Hz 48.077 kHz 50.000 MHz
75.000 Hz 46.875 kHz 49.500 MHz
XGA 1024 × 768 60.004 Hz 48.363 kHz 65.000 MHz
70.069 Hz 56.476 kHz 75.000 MHz
75.029 Hz 60.023 kHz 78.750 MHz
WXGA 1280 × 768 59.995 Hz 47.396 kHz 68.250 MHz
59.870 Hz 47.776 kHz 79.500 MHz
74.893 Hz 60.289 kHz 102.250 MHz
1280 × 800 59.810 Hz 49.702 kHz 83.500 MHz
1360 × 768 60.015 Hz 47.712 kHz 85.500 MHz
WXGA+ 1440 × 900 59.887 Hz 55.935 kHz 106.500 MHz
SXGA 1280 × 1024 60.020 Hz 63.981 kHz 108.000 MHz
75.025 Hz 79.976 kHz 135.000 MHz
1080p 1920 × 1080p 60.000 Hz 67.500 kHz 148.500 MHz