41
English
CONTROLS AND FEATURES
Wireless Information
The settings configured in Wireless Setup can be
confirmed.
a Press QUICK to open the Quick Menu.
b Press B / b to select Wireless Information and
press OK.
c When the Network Type is Wireless, a Wireless
Information window will appear.
NOTE: Press the RED button to scan for all APs.
NOTE: Even if an AP for IEEE 802.11n is used when
Encryption is set to WEP or TKIP, the Speed value might
be low. It is recommended that Encryption be changed to
AES (see “Manual Setup” on page 40).
Notes on wireless LAN environment
• The function of all IEEE802.11 is not supported.
• The ad-hoc mode is not supported.
• It is recommended to use IEEE 802.11a or IEEE
802.11n on 5 GHz for audio and SD video streaming.
• It is recommended to use IEEE 802.11n on 5 GHz for
HD video streaming.
• It is recommended that the encoding rate for streaming
video content is 20 Mbps or less.
• It is not recommended to use 2.4 GHz for audio and
video streaming.
• Content playback may be interrupted by various
surrounding interference.
Intel® WiDi
Picture Mode Standard
Picture Size Wide
More Information
Channel Options
Sleep Timer
HDMI CEC Device Control
Speakers TV Speakers
Headphone Level 30
Wireless Information
Recording Information
Quick Menu
Item Description
Status Connected is displayed when the TV is
connected with the AP.
Disconnected is displayed when the
TV is not connected with the AP.
Signal Connection signal strength with AP
(STRONG/MEDIUM/WEAK)
Speed Link with AP
Mode Working mode (11a, 11b, 11g, 11n)
Network
Name
SSID set
Authentication Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP’s MAC address is displayed
when the TV is connected with the AP.
TV MAC
Address
The MAC address of the TV(Wireless)
is displayed.
DHCP Enabled is displayed when using
DHCP.
Disabled is displayed when not using
DHCP.
IP Address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default
Gateway
Address of the Default GATEWAY
DNS Address of the DNS