Toshiba W43 Flat Panel Television User Manual


 
24
English
SETTING UP YOUR TV
g Each signal will show on the television. If it is not
your media recorder, press
B / b again to restart
the search.
h When your media recorder signal is found, press c
to move along to Station. Use
BbC c to put in
the required characters, e.g. VCR.
i Press OK to save.
j Repeat for each position you want to tune.
k Press EXIT when you have finished.
To prevent certain channels from being viewed, positions
can be skipped.
a Select ATV Manual Tuning from the Channel
Tuning menu.
b Press B / b to highlight the position to be skipped
and press OK.
c Press c to select Skip.
d Press B / b to turn Skip on and press OK.
8 on the screen indicates a skipped position.
e Press BACK and repeat from Step 2 or press
EXIT.
Each position has to be individually selected. To
turn Skip off, repeat the procedure for each
position.
Skipped positions cannot be selected by P
U and
P
u or by the controls on the television but can still
be accessed by the number buttons on the remote
control.
This television has direct channel entry if the
channel numbers are known.
Select the ATV Manual Tuning screen in Step
3. Enter the Position number, the System, then
C for standard (terrestrial) channels or S for
cable channels and the Channel number. Press
OK to save.
I
A
1
C
2
0
C
V R
ATV Manual Tuning
Station
PLEASE NOTE
Skip
0C2
1S10
2C7
3S40
4C22
5C25
6C28
7C30
ATV Manual Tuning
Pos. Channel Station
I
A
1
C
2
0
ATV Manual Tuning
Skip: On