ZyXEL Communications NSA210 Home Theater Server User Manual


 
Chapter 8 Network
NSA210 User’s Guide
163
8.5 The PPPoE Screen
Use this screen to configure PPPoE settings for a direct Internet connection.
Click Network > PPPoE in the navigation panel to open the following screen.
PPPoE allows the NSA to establish a direct Internet connection.
Figure 53 Network > PPPoE
Network
Diagnostic Tool
Use this section to test the network connection to a particular IP
address or domain name. Select an address or type it into the field.
Then click Ping to have the NSA send a packet to test the network
connection.
Successfully pinged host - The NSA is able to “ping” the host,
the network connection is OK.
Unable to ping host - The NSA is able to “ping” the selected
host.
Apply Click this to save your TCP/IP configurations. After you click Apply,
the NSA restarts. Wait until you see the Login screen or until the
NSA fully boots and then use the
NAS Starter Utility to rediscover
it.
Reset Click this to restore your previously saved settings.
Table 25 Network > TCP/IP (continued)
LABEL DESCRIPTION