Filter
Top Products
Appendix A Setting up Your Computer’s IP Address
NSA210 User’s Guide
384
2 Double-click on the profile of the network card you wish to configure. The
Ethernet Device General screen displays as shown.
Figure 179 Red Hat 9.0: KDE: Ethernet Device: General
• If you have a dynamic IP address, click Automatically obtain IP address
settings with and select dhcp from the drop down list.
• If you have a static IP address, click Statically set IP Addresses and fill in
the Address, Subnet mask, and Default Gateway Address fields.
3 Click OK to save the changes and close the Ethernet Device General screen.
4 If you know your DNS server IP address(es), click the DNS tab in the Network
Configuration screen. Enter the DNS server information in the fields provided.
Figure 180 Red Hat 9.0: KDE: Network Configuration: DNS