Filter
Top Products
Chapter 2 NAS Starter Utility
NSA210 User’s Guide
34
2.6 The Network Configuration Screens
Note: The Network Configuration screen that displays when you first use your NSA
differs from the ones that shows when the NSA’s hard disk has been initialized.
Both screens are described in this section.
Use this screen to change the NSA network settings such as IP address, subnet
mask, default gateway and DNS.
Click the icon under Config in the Device List screen. The following displays
when the hard disk in the NSA not been initialized.
Figure 8 NAS Starter Utility > Config (Uninitialized)
Map
Click this to map the NAS Starter Utility to a Windows network drive.
A pop-up screen appears. Enter the name of the share you want to
map and then click OK.
Discover
Click this to refresh the screen.
The NAS Starter Utility does not automatically refresh periodically.
Table 2 NAS Starter Utility
LABEL DESCRIPTION