Filter
Top Products
Chapter 9 Applications
NSA210 User’s Guide
181
9.6.4 Edit IP Filter
Use this screen to enable or disable IP filtering for BitTorrent downloads. IP
filtering blocks IP addresses known to share fake files. You can either get an IP
filter table from a website or use your own table.
Maximum
Numver of Active
Connections
Specify how many active connections are allowed on the NSA. Enter a
number from 1 to 500. This specifies the number of computers that
can connect to the NSA to download files being shared by the NSA.
Keep Sharing
While
With BitTorrent, the NSA starts sharing a file while you are
downloading it. Set how long to continue sharing a file after the NSA
finishes the download.
Select Upload/Download Ratio to keep sharing a file until the NSA
has uploaded a specific percent compared to the download.
Select Seeding Time to keep sharing a file for a specific number of
minutes after the download finishes.
Continuing to share a file helps other BitTorrent users finish
downloading it. Sharing out at least as much as you download helps
keep you in good standing in the BitTorrent community.
Enter -1 to share a file indefinitely. Leave both check boxes blank to
have the NSA stop sharing the file as soon as the download finishes.
If you select both options, the NSA keeps sharing a file until both
conditions exceed the values you configure. For example, you
entered 150% in the Upload/Download Ratio field and 120
minutes in the Seeding Time field. The NSA keeps sharing a file until
it has shared 1.5 times the size of the file and has passed 120
minutes.
Edit IP Filter Click this to enable or disable IP filtering for BitTorrent downloads.
Refer to Section 9.6.4 on page 181 for information about the fields in
this screen.
Apply Click this to save your changes.
Reset Click this to restore your previously saved settings.
Cancel Click this to return to the previous screen without saving.
Table 32 Applications > Download Service > Preferences > BitTorrent
LABEL DESCRIPTION