Filter
Top Products
Resetting the SIPI
Installing and Configuring the Avaya S8400 Media Server February 2006
53
Resetting the SIPI
1. Type reset and press Enter
Answer Y to the warning.
Note:
Note: Resetting the SIPI terminates the administration session. If further administration
is required, start a new telnet session.
Note:
Note: Control network settings (IP address, subnet mask, and gateway) become
effective when you exit the IPADMIN session.
2. Disconnect the laptop from the faceplate.
3. Check the LCD. Verify that it has an I P with a filled-in V that shows at the bottom. For
more information, see Figure 4
.
Figure 4: SIPI LED display for static address
Figure notes:
1. SIPI has a static IP address 2. SIPI has connectivity and an IP address
ledlip1 KLC 030502
1
2
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K