Filter
Top Products
Setting locations (if necessary)
Installing and Configuring the Avaya S8400 Media Server February 2006
59
Setting locations (if necessary)
After you set the daylight savings rules, you must set the locations for all media gateways
(cabinets). It is possible to have media gateways in different time zones. Even though you set
the date, time, and time zone through the Web interface on the media server, you also must set
locations through SAT commands.
1. Type change locations and press Enter.
2. In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.
3. Type the information in the various fields for each media gateway.
Note:
Note: In the Name field for location 1, call the media gateway (cabinet) Main.
4. Press Enter to effect the changes.
change locations Page 1 of 5
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Number Name Timezone Daylight-Savings Number Plan
Offset Rule Area Code
1 Main + 00:00 0
2 CA - 02:00 0
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :