Filter
Top Products
Installing and Configuring the Avaya S8400 Media Server February 2006 7
Chapter 1: Introduction
To configure the media server, use the Avaya Installation Wizard. To configure gateways and
other hardware components, use two administration interfaces:
● Maintenance Web Interface
● Command line interface, directly through, secure shell (SSH), telnet, or a terminal
emulation program such as Avaya Native Configuration Manager.
You are not required to install the media server before the port networks (media gateways);
however, the license file allows only 30 minutes to "see" the administered and connected IP
Interface (SIPI) circuit packs.
The following information is included in this installation procedure:
● Pre-installation: before going on site on page 9
● Configuration of the SNMP modules in the UPS on page 25
● Media server configuration on page 35
● IP interface translations on page 43
● IP interface configuration on page 49
● Post-installation administration on page 57
● Installation verification on page 63
● Media server access on page 73
● Installation troubleshooting on page 83
Audience
This documentation is for the following people tasked with installing and configuring the media
server components:
● Trained field installation and maintenance personnel
● Technical support personnel
● Authorized Business Partners