Filter
Top Products
Chapter 7: Post-installation administration
58 Installing and Configuring the Avaya S8400 Media Server February 2006
Setting daylight savings time rules
Even though you set the date, time, and time zone through the Web interface on the media
server, you also must set the daylight savings time rules through SAT commands.
1. Type change daylight-savings-rules and press Enter.
2. In the Change Day, Month, Date, Time, and Increment columns, type the appropriate
Start and Stop information for each rule. For example, 1:00 in the Increment field means
to move the clock forward or back by one hour at the transition point.
You can set up to 15 customized daylight savings time rules. If you have media gateways
in several different time zones, you can set up rules for them on a per-location basis. A
daylight savings time rule specifies the exact time when you want to transition to and from
daylight savings time. It also specifies the increment at which to transition.
Note:
Note: The default daylight savings rule is 0, meaning no daylight savings transition. You
can change any rule except rule 0 (zero). You cannot delete a daylight savings
rule if it is in use on either the Locations or Date and Time screens.
3. When done, press Enter to effect the changes.
change daylight-savings-rules Page 1 of 2
DAYLIGHT SAVINGS RULES
Rule Change Day Month Date Time Increment
0: No Daylight Savings
1: Start: first Sunday on or after April 1 at 02:00 01:00
Stop: first Sunday on or after October 25 at 02:00
2: Start: first on or after at : :
Stop: first on or after at :
3: Start: first on or after at : :
Stop: first on or after at :
4: Start: first on or after at : :
Stop: first on or after at :
5: Start: first on or after at : :
Stop: first on or after at :
6: Start: first on or after at : :
Stop: first on or after at :
7: Start: first on or after at : :
Stop: first on or after at :