Filter
Top Products
WEB OPERATION QC40198 User Manual
94 | Page
System default setup is:
Function: Console.
Data bit: 8
Stop bit: 1
Baud bit: 115200
Parity: None.
Network
Network interface is shown in Figure 7-38.
Figure 7-38
Please refer to the following chart for detailed information.
Function
Select the network card first.
Dynamically get IP address. You can get the device IP from
the router if you enable this function.
Default value is 37777.
Default value is 80.
Default value is 37778.
Maximum Network users. The value ranges from 0 to 10.
O means no users can access current device.