Filter
Top Products
MAIN MENU QC40198 User Manual
63 | Page
5.5.1 HDD Management
Here you can view and implement hard disk management. See Figure 5-28.
You can see current hard drive type, status, capacity and record time. When hard drive is working properly, system
is shown as O. When hard drive error occurs, system is shown as X.
You can select hard drive mode from the dropdown list such as read-only or you can erase all data in the hard
drive.
Note: system needs to reboot to get all the modifications activated.
Figure 5-28
Click alarm set button, the interface is shown below. See Figure 5-29 (This interface is just like the abnormity setup).
Please refer to Chapter 5.5.2 for detailed information.
Highlight icon
to select the corresponding function.
Figure 5-29