Q-See QC40198 Flat Panel Television User Manual


 
WEB OPERATION QC40198 User Manual
77 | Page
7.2 Login
Open IE and input combo DVR address in the address column. For example, if your combo DVR IP is 10.10.3.16,
then please input http:// 10.10.3.16 in IE address column. If you are accessing the DVR from a computer that is
attached to the same router as the DVR you would enter the IP address of the DVR. If you are accessing the DVR
from a remote computer you would enter the public IP address of the router. You can get this address go going to a
website such as
www.myipaddress.com from a computer that is attached to the router as the DVR. See Figure 7-9
Figure 7-9
System pops up warning information to ask you whether install webrec.cab control or not. Please click yes button.
After installation, the interface is shown below. See Figure 7-10.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
Input your IP
address here.