Filter
Top Products
NAVIGATION AND CONTROLS QC40198 User Manual
26 | Page
4.2.2.4 Enable all channel recording
By clicking “○” below “All” (as illustrated in Figure 4-7), you can enable all channel recording.
All channel schedule record
Click “ALL” next to “Schedule” as illustrated in Figure 4-7.
When system is in schedule recording, all channels will record as you have previously set (Main menu-
>Setting->Schedule).
The corresponding indication light on front panel will turn on.
Figure 4-7
All channel manual record
Click “ALL” next to “Manual” as Illustrated in Figure 4-8.
When system is manual recording, all schedules you have set up will be off (Main menu->Setting-
>Schedule).
You can see indication light on front panel turns on, system begins manual record now.
Figure 4-8
4.2.2.5 Stop All Channel Recording
Click “ALL” next to “Stop” as illustrated in Figure 4-9.
System stops all channel recording no matter what mode you have set in the menu (Main menu->Setting-
>Schedule)
Figure 4-9