Filter
Top Products
AUXILIARY MENU QC40198 User Manual
72 | Page
Figure 6-6
6.3.1 Preset Setup
Note: The following setups are usually operated in Figure 6-2, Figure 6-5 and Figure 6-6.
In Figure 6-2, use eight direction arrows to adjust camera to the proper position.
In Figure 6-5, click preset button and input preset number. The interface is shown in Figure 6-7.
Add this preset to one patrol number
Figure 6-7
6.3.2 Activate Preset
In Figure 6-6 please input preset number in the blank, and click preset button.
6.3.3 Patrol Setup
In Figure 6-5, click patrol button. The interface is shown in Figure 6-8.
Input preset number and then add this preset to one patrol.
Figure 6-8
6.3.4 Activate Patrol
In Figure 6-6, input patrol number in the blank and click patrol button
6.3.5 Pattern Setup
In Figure 6-5, click pattern button and then click begin button. The interface shows like Figure 6-9.
Please go to Figure 6-2 to modify zoom, focus, and iris. Go back to Figure 6-9 and click end button.
You can store all these setups as pattern 1.