Filter
Top Products
NAVIGATION AND CONTROLS QC40198 User Manual
34 | Page
Figure 4-22
Period: Click set button (Figure 4-20), you can see the interface shown in Figure 4-23. Here you can set
for business day and non-business day as illustrated in Figure 4-24. Click set button to generate the
interface shown in Figure 4-24. Here you can set your own setup for business day and non-business day.
Figure 4-23
Figure 4-24
Anti-dither: Here you can set anti-dither time. This is the time you would want the system to delay before
starting recording on a motion alarm.
Alarm output: when an alarm occurs, system can upload alarm to the network (Including the alarm center.)
Tour: Here you can enable tour function when alarm occurs. It is a one-window tour. Please go to chapter
5.3.9 Display for tour interval setup.
Please highlight icon
to select the corresponding function. After all the setups are complete click save
button, system goes back to the previous menu.
Note:
In motion detection mode, you can not use copy/paste to set channel setup since the video in each channel
may not be the same.