Filter
Top Products
NAVIGATION AND CONTROLS QC40198 User Manual
42 | Page
4.8.2.1 Intelligent Positioning Key
In the middle of the eight direction arrows, there is a 3D intelligent positioning key (see figure 4-38). This function
only works if your protocol supports it, and you need to use mouse to control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to adjust section size.
The dragged zone supports 4X to 16X speeds. The function will work automatically. The smaller the zone you
dragged, the higher the speed.
Figure 4-38
Here is a chart for your reference:
Name
Function
key
function
Shortcut
key
Function
key
function
Shortcut
Key
Zoom
Near
Far
Focus
Near
│
Far
►
│
Iris
close
Open
4.9
Preset/ Patrol/Pattern/Scan
Click the “set” button illustrated in Figure 4-36. This will generate the interface shown in Figure 4-39.
Here you can set the following items:
Preset
Tour
Pattern
Border
Figure 4-39
Click the page switch button illustrated in Figure 4-36. This will activate the following functions:
Preset
Tour
Pattern
Auto scan
Auto pan
Flip
Reset
Page switch