Filter
Top Products
2
2-6
EMC Fibre Channel Disk-Array Processor Enclosure (DPE) Hardware Reference
Installing a Rackmount DPE
5. Secure the DPE to the vertical channels of the cabinet as shown
next.
Figure 2-2 Securing the DPE to the Cabinet Front Channel
6. Secure the rear mounts of the DPE to the back channels of the
cabinet, as shown in Figure 2-3.
NOTE: Only one hole in the enclosure bracket aligns
with a hole on the channel. The hole you use depends
on where the rails are mounted in the cabinet.
Fasten the front of the enclosure to
the front channels in the cabinet
using two screws (one per side).