Filter
Top Products
3
3-12
EMC Fibre Channel Disk-Array Processor Enclosure (DPE) Hardware Reference
Servicing and Upgrading a DPE
Continue to the next section to install the new or replacement
disk module.
Installing a Disk
Module
1. Gently insert the module as follows:
Figure 3-5 Installing a Disk Module
The disk module Active light flashes to reflect the spin-up
sequence (see page 3-2).
After inserting a disk module, wait for the activity lights on the other
drives to resume a steady flicker before inserting another module. The
activity lights show that the Core Software has rediscovered the FC loop.
2. Remove and store the ESD wristband.
The door must be closed for EMI compliance when the DPE is powered
up. Open it only to replace or add a disk module.
A. Grasp the disk module’s handle.
B. Align the module with the
guides in the slot.
Latch
C. Gently push the module into the
slot until the latch engages.