Filter
Top Products
3
3-40
EMC Fibre Channel Disk-Array Processor Enclosure (DPE) Hardware Reference
Servicing and Upgrading a DPE
3. Remove the power-supply module, as shown in Figures 3-29 and
3-30.
Figure 3-29 Removing the Top Power-Supply Module
Latch
A.
With your thumb, push the latch up
and then right as far as possible.
B.
Grasp the handle with one hand, and
gently pull the module from the enclosure,
supporting it with your other hand.
You may need to brace your hand
against the supply module's handle.