Filter
Top Products
3
Removing an SP or an SP Filler Module
3-23
Servicing and Upgrading a DPE
Figure 3-15 Removing an SP or Filler Module
Retaining screw
(one each side)
Ejector
(one each side)
A. Loosen the retaining
screws.
B. Simultaneously open the
ejectors as far as they will
go.
C. Gently pull the SP or filler
module from the
enclosure, supporting it at
its sides.
D. If you removed an SP (not
a filler), place it on a
static-free surface.