Filter
Top Products
1 - 7
List of Options
*
1 Prepare for UGx20 with card interface, or UGx20 and UG00P-MR (card recorder).
*
2 UG00P-U1 : Rear-side installation I/O unit, UG00P-U2 : Panel-side installation I/O unit
*
3 UG03I-T/UG02I-T : T-LINK, UG03I-J/UG02I-J : OPCN-1, UG03I-S/UG02I-S : SX BUS,
UG03I-C : CC-LINK, UG03I-E(2) : Ethernet or FL-net, UG03I-P : PROFIBUS
3 System Composition
Card Interface
Video Interface
Analog RGB Input
Interface
Extension I/O Unit : UG00P-U1
(16 inputs / 16 outputs)
Serial Extension I/O : UG00P-U2
(16 inputs / 16 outputs)
Extension Memory
Cassette: (4Mbyte)
SRAM Cassette
: (512Kbyte)
Communication Interface Unit
: UG03I-S/J/T/C/E/P
Communication Interface Unit
: UG02I-S/J/T
Card Recorder
: UG00P-MR
Te rmi nal Converter
: UG00P-TC
Item
*
2
*
3
*
1
Optional
by Manufacturer
Optional by User
*
3
*
1
Type
UG220 UG420H-SUG320UG221 UG520H-VUG420H-VUG420H-T
*
2
UG00P-D4
UG221P-D4
UG00P-SR
UG221P-SR
Memory Card
A SRAM card or FPROM card can be used for the memory card. The following table shows the
difference between the SRAM card and FPROM card:
The following memory cards supplied from Fuji Electric Co., Ltd. are recommended.
SRAM
UG00K-S25K(256K) UG00K-S02M(2M)
UG00K-S51K(512K) UG00K-S04M(4M)
UG00K-S01M(1M)
FROM
UG00K-F25K(256K) UG00K-F01M(1M)
UG00K-F51K(512K) UG00K-F02M(2M)
*
The FROM card cannot support any functions of memory manager and data logging.
SRAM
Supports the functions of POD memory manager and
data logging, and transmission of screen data.
Data is partially readable and writable at any time.
Contains a battery. Replace the battery when it runs
out.
FROM
Supports transmission of screen data.
Data is written and read all together. Data cannot be
written or read partially.
No battery replacement is required.