Filter
Top Products
1 - 58
18 Function Switches
Main Menu
UG420H-TC12
1998-5 -5 07:23:30
FONT
VER.1.100/1.090/1.000
JAPANESE 32
I/F DRV VER.1.100
MELSEC AnA/N/U
SYSTEM PROG. VER. 1.150
System Information
Screen Data
Information
Size : 2883584
PLC Type: MITSUBISHIAnA/N/U series
Comment :
Error: Stop
Time-Out : 0.50 sec
Retry : 3
Connection : 1 : 1 Baud Rate : 19200
Signal Level : RS-232C Data Length: 7
PLC Stat.No.: 0 Stop Bit : 1
Parity : Even
Send Delay : 0msec
Memory-
Card
Editor:MJ1
I/O Test
Cassette Adjust
Date:
Time:
Format
Execute
S e t
Main Menu
Cassette Adjustment
Date and Time Adjustment
Format of SRAM Cassette
* Formats SRAM cassette in the present screen data type.
2000-6-26 14:38:51
Formatting the SRAM cassette
When you changed the setting of SRAM cassette area, be sure to format the SRAM cassette.
SRAM cassette can be formatted from the [Main Menu] screen.
If the format of the SRAM cassette does not coincide with the setting of screen data, the SRAM cassette
cannot be used (error No. 163 occurs.)
•
How to format the SRAM cassette
1)Activate the [Main Menu] screen.
Press the [Cassette Adjust] switch. This
switch is available for FONT VER. 1.100/
1.090/1.000 or newer.
2)With the [Cassette Adjust] switch, display the [Cassette Adjust] screen.
3)Press the [Format] switch and then the [Execute] switch.
Then the cassette is formatted the same as the currently displayed screen data, and you return to the
[Main Menu] screen.