Filter
Top Products
102
Additional Information
When the camcorder is connected to a PC
Symptom Cause and Correction
Reference
page
No medium icon
appears on the PC.
The camcorder is not turned on. Check the power supply. 19
Turn the PC off and disconnect the USB cable. Then turn
the PC back on and reconnect the cable.
—
An error occurs
while playing back
movies recorded on
the camcorder using
the PC.
Playing back High Definition (HD) movies requires high
data processing power. Quit other applications and play
back again. 79
The software does
not run correctly on
the PC.
Turn the PC and camcorder off, and try again.
—
An error occurs
during writing to a
disc.
The temperature of the camcorder is too high due to
continuous operation.
Disconnect the camcorder from the PC, remove the disc
from the camcorder, and then turn it off. After a few
moments, connect them again and write to a brand-new
disc.
82
Transfer of images
stops.
Is the disc scratched or dirty?
Clean the disc.
108
An error appears
when starting
ImageMixer 3
AVCHD Edition for
HITACHI.
Make sure that your PC display adapter (video card)
conforms to Direct X
®
9.0c.
79
The DISC EJECT
switch does not work
when the camcorder
is connected to a PC.
While the camcorder is connected to the PC, use Explorer
to right-click the camcorder drive icon and select “Eject”.
82
When the time stamp
of a file on a disc is
viewed on a PC, it is
different from the
actual recording
time.
The file system of this camcorder is operated on
Greenwich Mean Time (GMT), and time lag information
has not been set. The time stamp of files viewed on
Explorer looks different from the actual recording time.
The actual recording time will appear for the date/time
indication on the playback screen.
—
It takes a long time
to save a video
edited.
If you are editing a video file whose contents are different
from those of the project settings, it may take some time,
since the entire video file must be re-encoded. Reconfirm
the project settings.
—
Unable to import
scenes from BD-R/
DVD-RW/DVD-R.
Before importing scenes from the disc, disconnect the
camcorder from the PC and finalize it. Once finalized,
you cannot add a scene (except DVD-RW (VR mode)).
77