Filter
Top Products
11
Introduction
Conduct test recording.
• Before recording important shots, always conduct test recording to confirm that images
are normally recorded.
Recording surface
• Single-sided disc: unlabeled side.
• Double-sided disc: both sides.
How to hold a disc
For correct recording
• Do not touch the recording surface of a disc.
• Check that a disc recording surface is not dirty or
scratched.
• If the recording surface is dirty, wipe it clean using a
dry
soft cloth.
Caution on disc loading
• Never touch the pickup.
Caution on vibrations and impacts
• While the ACCESS indicator (p.14) is lit, do not subject the
camcorder to strong vibrations or impacts. Caution should
be particularly observed while the indicator remains lit for
a while after the end of recording.
About BD/DVD
• We recommend using Hitachi Maxell brand discs. The
compatibility of the discs with this camcorder is
confirmed.
• If there is concern that the camcorder may be subjected
to large vibrations or impact during transport, remove
the BD/DVD and protect the camcorder using soft protective materials.
Before Using the Product
- Be sure to read this information -
Single-sided disc
Double-sided disc
Labeled side
Recording side
Recording side
Recording side
Use a soft cloth and gently
wipe the disc surface from
the inner to the outer region.
Pickup