Filter
Top Products
17
Introduction
How to change the LCD brightness
You can adjust the brightness of the LCD monitor when it is too dark or too bright
to see the image on display.
The brightness changes every time you select LCD BRIGHTNESS. There are
three settings available.
At time of purchase of this camcorder, the brightness is set to the brightest.
The “LCD Brightness” setting is retained in memory even when the power is
turned off. However, if the camcorder is turned on while being powered from an
AC power outlet, the “LCD Brightness” setting will be reset to the brightest.
About the LCD monitor display when recording
yourself (the lens and LCD monitor are facing you)
• The LCD monitor displays a mirror image of the subject.
• The remaining battery charge indicator will only appear when battery power is
almost gone. The battery charge indicator flashes red in this case.
• A warning message will not be displayed (p.89). You can confirm the warning
message by rotating the LCD monitor 180° back to its normal orientation.
How to Open and Use the LCD Monitor
LCD
BRIGHTNESS
You can use the LCD monitor as follows.