Filter
Top Products
90
Additional Information
Cannot combine
scenes with different
recording dates.
Create Playlist first
and then combine
scenes.
Scenes with different recording dates cannot be
combined. Create a Playlist first, and then combine such
scenes on the playlist.
63, 67
Cannot combine.
Select multiple
scenes.
Select a range of at least 2 consecutive scenes to be
combined. 67
Cannot delete scene.
Delete other scenes
first and then retry.
Part of a divided scene is selected for deletion.
67
Cannot divide. Too
short to divide.
This message will appear when the scene is extremely
short due to repeated divisions.
67
Cannot divide.
Unselect multiple
scenes.
Division was attempted when multiple scenes were
selected. 67
Cannot execute.
Change display
category to All.
This message will appear if you attempt to combine or
move scenes when “Category” in “Others” in the menu is
set to “Dubbed” or “Un Dubbed”.
60
Cannot read disc.
Check dirt/crack/
both-sides contrary/
inserted correctly.
Error occurred while the disc was being recognized.
Make sure that there is no scratch or dirt on disc, that the
surface/back of disc is not reversed, and that the disc is
firmly pushed against the turntable. See *3 and *4 on
p.96.
23, 107
Cannot record video.
Set Movie/Stills
switch to “Movie”.
This message will appear when the record button is
pressed with the movie/stills switch set to “ ”. 27
Cannot take still
image. Set Movie/
Stills switch to
“Still”.
• This message will appear when PHOTO is pressed
with the movie/stills switch set to “ ”.
• You cannot record stills on HDD/BD/DVD. Use a SD
card to record stills using this camcorder.
29
Check disc. A disc unusable on this camcorder may have been
inserted or the disc may be damaged.
Make sure that the type of disc is correct, and that the
disc is not write-protected.
21, 72
Check HDD. The HDD may be damaged. 72
Check SD Card. Check the card inserted in the camcorder. The card must
be either locked or incompatible with the camcorder.
22
Control Information
Error.
Scenes may have been edited on another device, etc.
Update the control information.
101
• Use another disc.
• See *3 and *4 on p.96.
—
Message Cause & Troubleshooting
Reference
page