Filter
Top Products
75
Viewing on the Other Devices
Viewing on your TV
Turn on the TV and switch the TV input to the terminal where the camcorder
is connected.
Turn on the camcorder.
The image shown in the camcorder’s LCD monitor appears on the TV screen,
allowing you to view playback, recording, and editing on the large screen of
your TV.
• If the camcorder is connected to a TV through the HDMI OUT terminal and
another image terminal at the same time, the image is output only through the
HDMI OUT terminal.
• If the camcorder’s COMPONENT terminal and A/V OUT terminal are
connected to a TV at the same time, the image will be output from the
COMPONENT terminal only.
Hints
• Volume can be adjusted on your TV.
• When operating the camcorder while viewing your TV screen, using the supplied
remote control is convenient. However, if you are using other Hitachi-brand A/V
devices, they may be operated by the camcorder’s remote control.
Notes
• If you have a wide-screen TV (screen ratio 16:9), and the TV is set to wide mode, the
disc navigation screen may not fit within the TV screen. In this case, change your
TV’s wide mode setting. (Refer to your TV’s operation manual.)
• Do not leave the camcorder’s menu screen and disc navigation screen displayed on
your TV screen for too long. Doing so may cause damage (ghosting) on your TV
screen.