Filter
Top Products
PAN / TILT / ZOOM
7–5
7.3 ADVANCED PTZ SETUP, CONTINUED
1 Camera Menu
Opens the OSD PTZ camera menu.
2 On-Screen Compass
Allows On-Screen control of a PTZ camera.
3 RS-232 / RS-485
Defines how to send the PTZ signal to the camera.
4 Select Camera
Selects the current camera to be edited.
5 Port Settings
Defines the specific settings to transmit to the PTZ.
6 Enable Pan/Tilt
Enables the DVR to control the PTZ camera.
7 Preset and Tour
Used to create Presets and Tours for the PTZ
camera. Since each camera creates these in a
different way, there can be multiple methods.
8 Protocol
Selects the protocol to use for the selected camera.
The protocol is the unique set of instructions that
allows the DVR to communicate with the PTZ
camera.
9 PTZ Status on Close
This option will activate a Tour or Preset when the
PTZ controller is closed.
10 Address Setting
Only available on select PTZ cameras. These options
need to be set when there are more PTZ cameras
connected together than there are inputs on the
DVR. Setting these options allows for attaching
several DVRs to the PTZ chain.
11 Open PTZ Controller
Opens the PTZ controller, allowing the PTZ camera
to move.
Pan Speed
Increases or decreases the Pan speed.
Tilt Speed
Increases or decreases the Tilt speed.
Zoom Speed
Increases or decreases the Zoom speed.
12
Focus Speed
Increases or decreases the Focus speed.