Honeywell FUSION DVR User Manual


 
SETUP OPTIONS
5–19
5.6 RECORDING SCHEDULE, CONTINUED
5.6.3 SCHEDULING SENSORS AND RELAYS (BY EXAMPLE)
It is easy to add advanced recording functionality using Sensor Inputs and Relay
Outputs.
SENSOR - Sensor Inputs can be programmed to instantly start one or more cameras
recording when an alarm occurs. These alarm events can also activate Relay Outputs
as desired.
RELAY OUTPUT - Relay Outputs can be set to activate when motion alarms or sensor
alarms occur.
The schedule will be as follows:
1. SUN-SAT (12AM-11:59PM) Cameras 1 and 2 will be activated on Sensor #3
and/or Sensor #5, which will then activate Relay Output #7 and #13.
2. SUN-SAT (12AM-11:59PM) Camera 3 will be set to Record on MOTION.
When motion occurs it will activate Relay Output #7 and #10.
3. SUN-SAT (12AM-11:59PM) Sensor #6 will activate Relay Output #8 when an
alarm occurs. This event will NOT cause any cameras to record.
To do this, a total of 3 schedules will be created.