Filter
Top Products
FUSION DVR Digital Recording and Transmission System
6–10
6.12 INDEX SEARCH
Using the Index Search can greatly decrease the amount of time spent searching
through saved video. The Index Search allows a user to perform a search based on
criteria such as Sensor, Motion and Instant Record events.
1 Select All
Cameras
This option selects all cameras.
2 Multiple
camera
search
Select one or more cameras to
search.
3 Select Time
The default search time is 24
Hours. If this option is select
then a Start Time and End Time
must be entered.
4 Start Time
Specifies the Start Time for the
Index Search.
5 End Time
Specifies the End Time for the
Index search.
6 Sort Option
Searches by the selected
event: Sensor, Motion
Detection, or Instant Record.
7 All Event
Searches on all events (sensor,
motion, instant recording) for
the selected camera(s).
6.12.1 PERFORMING AN INDEX SEARCH
1. Select the Index Search button. The Index Search Option box will open.
2. Select a single camera or check the All Cameras option.
3. Select an event to search (sensor, motion, instant record) or select the All Event
option.
4. Press OK. There may be a delay while results are returned.
Results will be displayed in a column on the left side of the screen.
If no results are found, “NO IMAGE FOUND” will appear in the column.
5. Once the results are displayed, double-click on any one to search through them.
6. Once the desired image is found, apply it to the Main Search by selecting the
Close button at the bottom of the results column.
7
6