Filter
Top Products
VR-N100U USERS MANUAL
Page 32 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
3.4. The Administration “Networks” Utilities
Proceed to select the Administration icon on the VR-N100U Toolbar to get back to the main Administration Utilities page.
From there, select the Networks Utility Page link to navigate to the following pages.
3.4.1. Network Information
By selecting the View network settings link, it will bring you to the Information page that provides an overview of all of the
network settings for your VR-N100U. One of the immediate management benefits of the Information page is that from a
single screen, the administrator is able to determine the current networking setting of the VR-N100U.
This page displays the IP Address, Subnet Mask, IP Broadcast, Default Gateway, DNS, Domain Name, WINS Server, AFP
and Ethernet Address information of the VR-N100U as well as how some of the settings were obtained. Details regarding any
of these network parameters can be found in the 7. Glossary of Terms section of the manual.
3.4.2. Static IP Setup
Administrators can easily setup static IP addresses for each VR-N100U in the event that there is no DHCP server being
utilized on the network. By selecting the Static IP link, the window will display a form with seven fields. Information regarding
IP Address, Subnet Mask, IP Broadcast and Default Gateway must be filled in along with selecting Yes for Enable Static IP
Address. Proceed to click the Save button, and then a reboot screen will appear. You must select the Yes button so that VR-
N100U can go through an automatic reboot using the new IP address and the other information you provided in the form. If
you click on Cancel, the information you provided will still be saved, however, it will not be activated until you reboot the VR-
N100U.