Filter
Top Products
VR-N100U USERS MANUAL
Page 53 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
From within this window, you can control the major functions of each individual camera similar to those
within the VR-N100U page. When you select camera(s), the associated camera(s) within the view will be
highlighted in red as the supported control buttons will be enabled. The manufacturer and model is displayed
on the upper right corner for the selected camera. You have the ability to Select All, Deselect All as well as
filter the camera list with PTZ or Motion Detection only cameras.
Reload Camera List
Clear Selected Slots
Tilt Up
Tilt Down
Pan Left
Pan Right
Zoom In
Zoom Out
Start Continuous Recording
Stop Recording
Motion Detection
Full Screen View
For monitoring stations that are only interested in displaying certain cameras onto their monitors, you can
click on this icon to open up a new full screen view without the toolbar icons, pull-down menus, page tabs,
VDRView borders, and other information that is presented on the screen. The resolution size of each
camera is increased as seen by comparing the two different screen shots below.