Filter
Top Products
VR-N100U USERS MANUAL
Page 70 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0
3. Select the Browse button to open up a Choose File dialog box. Locate the VR-N100U .BIN firmware file that you
downloaded from the web site, select the file and click on the Open button. If you selected a firmware file that is older
than the one currently installed on the selected VR-N100U, a warning screen will appear. Click on the Yes button to
continue.
4. After the firmware is specified, proceed to click on the Update Image button to execute the firmware reflash process.
5. Watch the Status section of the Reflash Firmware screen. It describes what the VR-N100U is doing and where it is in
the reflash process. You can follow the process by monitoring the Status displayed in the Reflash Information screen
on your monitor, or by tracking the Status indicator light (the leftmost light) or LCD Display on the front of the VR-
N100U unit.
NOTE1: While the reflash is in progress, the Status light will flash green and amber. The buttons on the Reflash Information
screen are grayed out during this process so you cannot accidentally interrupt the reflash. It is absolutely critical that
you do nothing that will stop this process, including removing power from the unit. If you do, you will almost certainly
corrupt the flash memory, resulting in a dysfunctional unit.
NOTE2: The firmware reflash procedure will take a few minutes and during this process, the VR-N100U will be offline.
NOTE3: You can also reflash your VR-N100U using FTP. The instructions for an FTP reflash can be found in section 6.4 User
FTP Client to Flash VR-N100U of this manual.