Filter
Top Products
101
Appendix B: Connecting a PTZ Camera
3 Configure the following according to your PTZ
camera’s specifications:
• Channel: S
elect the channel the PTZ camera
is connected to.
• Pr
otocol: Select from Pelco-D or Pelco-P
• Baud rate
: Select the PTZ camera’s baud
rate
• Data B
it: Select from 5~8 data bits.
• Stop Bit: Sel
ect from 1 or 2 stop bits.
• Pa
rity: Select from None, Odd, Even, Mark
or Space.
• Crui
se: Select Enable to enable PTZ cruise.
• Addr
ess: Enter the PTZ camera’s address
Use the Copy To drop-down menu to copy the
PTZ
settings to multiple channels.
4 Cl
ick Apply to save your settings.
Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1 Sel
ect the channel that the PTZ camera is connected to.
2 Right
-click and press the PTZ button ( ). Enter the system password. The PTZ menu
opens.
3 Use
the on-screen PTZ controls to control the camera.
PTZ Presets and PTZ Cruise
You can set preset positions for your PTZ cameras. You can also use PTZ cruise to have the
camera automatically cycle through presets.
Channel:
Select the channel the PTZ
camera connects to.
Click the + and - symbols to
adjust the camera Zoom,
Focus and Iris settings
Direction keys:
Click to pan and tilt the camera
Speed Slider:
Increase or decrease the pan and tilt
speed
Camera Pre-set
controls