Filter
Top Products
5
Step 4: Connect the Monitor
• Connect a VGA cable (not included) from the VGA port to the monitor.
Step 5: Connect the Power Adapter and Power on the DVR
• Connect the included power adapter to the DC 12V port. Connect the other end of the power
adapter to a wall socket or a surge protector.
• 16
-channel models only: Turn the power switch to I to turn on the DVR.
• At startup, the system performs a basic system check and runs an initial loading sequence.
After
a few moments, the system loads a live display view.
Step 6: Verify Camera Image
• Power on the cameras, and then verify the camera video quality before mounting the cameras
to a permanent location.
• Mount the cameras under a sheltered location. Always verify the outdoor rating of your camera
bef
ore installing it in a permanent location.
Step 7: Set the Time
• Set the system time and date for accurate video time stamps. Videos with inaccurate times
may not be valid as surveillance evidence.
• For details on setting the system time, see “Setting the Date and Time” on page 17.
8-channel model shown
VGA
8-channel model shown
Connect power adapter
16-channel: Connect
power adapter and turn on
power switch