Filter
Top Products
24
5. Features and Functions
1 S-VIDEO SIGNAL INPUT/OUTPUT TERMINALS [S-VIDEO]
Use these terminals to connect this unit to S-VIDEO signal equipment.
Refer to page 17 for connection.
2 VIDEO INPUT/OUTPUT TERMINALS [VIDEO]
Use these terminals to connect this unit to VIDEO signal equipment.
Refer to page 17 for connection.
3 RS-232C PORT [RS-232C]
Use this terminal to connect this unit to a device equipped with RS-232C interface.
Refer to pages 19 - 21 for connection.
4 EXTERNAL REMOTE TERMINAL [REMOTE 1]
Memorizing images are available by the remote signal inputted through this terminal. It is necessary to make a circuit for
remote control to use the function.
Refer to page 83.
5 EXTERNAL REMOTE TERMINAL [REMOTE 2]
Memorizing images and printing are available by the remote signal inputted through this terminal. It is necessary to make a
circuit for remote control to use the function.
Refer to pages 81 - 83.
6 POWER SOCKET [AC LINE]
This socket connects to the power cord (accessory).
Insert the cord firmly.
7 IMPEDANCE SELECTION SWITCH [IMPEDANCE RGB, SYNC. ]
This is a 75Ω / HIGH impedance selection switch for RGB or Sync. signal.
8 RGB ANALOG OUTPUT TERMINALS [R,G/G+SYNC, G,H+V-SYNC]
This is a BNC type output terminal for a RGB analog signal. Sync. signal can be selected between 0.3V(H+V-SYNC.) and
TTL(H+V-SYNC.) signals.
Refer to page 18 for connection.
9 RGB ANALOG INPUT TERMINALS [R,G/G+SYNC , B,H+V-SYNC ]
This is a BNC type input terminal for a RGB analog signal. The sync. signal can be automatically selected between H/V
composite and SYNC. ON GREEN (sync. signal imposed on the green video signal) signals. Refer to page 18 for switch
setting.
3 REAR PANEL
R G/G+SYNC B H+V-SYNC
R G/G+SYNC B H+V-SYNC
IN
OUT
S-VIDEO
REMOTE
AC LINE
VIDEO
75Ω
HIGH
75Ω
HIGH
IMPEDANCE
SYNC.
RGB
RS-232C
12
Potential equalization connector
This is used to equalize the potential of the equipment
connected to the unit.
For details, refer to the installation instruction of the
equipment to be connected.