Mitsubishi Electronics CP700E VCR User Manual


 
49
7. Setting the functions (Main menu)
SEPARATE
Function
Switching the white frame
Separate the each image in multi-image print with white frame
ON................ White frame print
OFF .............. Normal print
• When “MULTI” is set to “ON”, this function is displayed.
4 PRINT Print setting 1
MODE
Function
Selecting the paper size
Selecting the paper size depending on the installed the ink sheet.
S................... S-size ink-sheet ( model: PK700S)
L ................... L-size ink-sheet ( model: PK700L)
• When installing L-size ink sheet or monochrome ink sheet and selecting “S” , the image can be
printed on S-size. Also the number of prints is as follows.
• When S size ink sheet is set, S-size printing is made even if “L” is selected in print mode.
GRAD (Gradation )
Function
Change the gamma curve of the image
Selecting the gamma curve from 3 types
NML ............. Normal
DEEP ........... Deep
ECHO ........... The gamma curve is set according to medical equipment.
, If changing the setting value of gamma in ECHO, the value is able to change in “ECHO GAMMA
ADJ” on “MEMORY SW MENU” “PRINT SETTING” menu.
The setting value in the “ECHO GAMMA ADJ” on the print setting menu is applied to “ECHO” .
Refer to page 63.
APT
Function Adjusting image outline.
This function is to control aperture and to reinforce or soften the contour.
SOFT [ S ] ............. Soften the contour
NML [ N ] ............. Do not perform APT
HARD [ H1 ] ............. Reinforce the contour
HARD [ H2 ] ............. More reinforce the contour
S
S
L
Print
mode
S size print
(200 sheet)
S size print
(125 sheet)
L size print
(125 sheet)
Ink
sheet
S size print
(200 sheet)
L