Filter
Top Products
39
7. Setting the functions
MEMORY
POWER
+
When pressing the power button while
pressing the MEMORY button, the
following menu is indicated.
1.
TIME ADJ
28-02-99
19:45:00
2.
KEY SETTING
KEY LOCK : OFF/ON
MEM & PRINT : OFF/ON
MEM & STOP : OFF/ON
MEM & MON : OFF/ON
PRINT & CLR : OFF/ON
CLEAR KEY : ONE/ALL
CHANGE : OK/CANCEL
3.
SIGNAL ADJ
IN SYNC : 0.3V / TTL,SOG
OUT SYNC : 0.3V / TTL
SYNC : POSI/NEGA
RGB SOG OUT : OFF/ON
H-START : NML/FRONT
SPCL TIMING : OFF/ON
MON R-SUB : 0
MON B-SUB : 0
CHANGE : OK/CANCEL
4.
PRINT SETTING
PRN DIR : NML/REV
PRN SPEED : NML/FAST
MARGIN CUT : OFF/ON
V POSITION : 0
ECHO GAMMA ADJ
a : ( 64 , 0 )
b : ( 128 , 0 )
c : ( 192 , 0 )
CHANGE : OK/CANCEL
SET
SET
SET
SET
SET
p56
Print setting display 2
p 61
p 59
p 58
System setting display 2
Button function setting display
Day and present time setting display
Signal adjustment display
MEMORY SW MENU
1.
TIME ADJ : PUSH [ ]
2.
KEY SET : PUSH [ ]
3.
SIGNAL ADJ
: PUSH [ ]
4.
PRINT SET : PUSH [ ]
5.
SYSTEM SET : PUSH [ ]
CHANGE : OK / CANCEL / INIT
SET
Memory SW menu
OK
USER SIZE ADJ
H-POSI : 0 ( -10 ~ 10 )
COPY : OFF/W/M/N
TOP : 0 ( -16 ~ 134)
BOTTOM : 0 ( -134 ~ 16)
LEFT : 0 ( -34 ~ 270)
RIGHT : 0 ( -270 ~ 34)
CHANGE : OK/CANCEL
SET
p43
p49
Image size setting display
Analog image adjustment display
Not displayed when selecting RGB or S-video
Not displayed when selecting RGB
"COMMENT" and "MIRROR are not
indicated when selecting
" MODE : PHOTO".
Indicated only when "MULTI : ON"
CARD is indicated when selecting
MULTI : ON and PHOTO
ANALOG ADJ
BRT : 0 --------------------------
CONT : 0 --------------------------
R-SUB : 0 --------------------------
B-SUB : 0 --------------------------
COLOR : 0 --------------------------
CENTER :ON/OFF
CHANGE : OK CANCEL
SET
p11
p 57
5.
SYSTEM SETTING
PRG ALL INIT
: OFF/ON
BAUD RATE
: 1200/2400
/4800/9600
COMMAND TYPE : A/B
RESPONSE : RET/NO
REMOTE BUSY : H/L
REMAINING : OFF/0/...
/5/.../10/
CHANGE : OK/CANCEL