Mitsubishi Electronics CP700E VCR User Manual


 
29
6. Printing Procedures (Basic prints)
1 Selecting input signal
, Select “VIDEO” , “S-VIDEO” or “RGB” according to the input signal.
, The input signal can be set on the menu screen displayed on the monitor or LCD.
, It is not necessary to select the input signal everytime you print unless the input signal is changed.
1 Press the MENU
MENU
button.
, “MAIN MENU” is displayed.
2 Press the DOWN or UP button to select “2. SIGNAL SET
[ ] ]” .
3 Press the RIGHT
button.
, 2. SIGNAL SET” menu screen is displayed.
,
Normally, “INPUT” is selected when opening the “2. SIGNAL SET [ ] ]”
on step 2. When other item is selected, press the UP or
DOWN
button to select “INPUT” .
4 Press the RIGHT
shift button to select “VIDEO” , “S-VIDEO” or “RGB” .
Main Menu
1.COLOR ADJ :PUSH[>]
Main Menu
2.SIGNAL SET:PUSH[>]
Signal Set Menu
INPUT:RGB
Signal Set Menu
INPUT:Video