Mitsubishi Electronics CP700E VCR User Manual


 
51
7. Setting the functions (Main menu)
5 COMMENT Making a comment
Function Making a comment on print
Refer to pages 53-58 for details.
6 SYSTEM System setting 1
SIZE
Function
Selecting a print area of printing image
Selecting the print size and user print size setting
printing size
Picture element (S size) ( L size)
W 1216 X 600 dot 100 X 75 mm 130 X 98 mm
M 1148 X 568 dot 94 X 70 mm 123 X 92 mm
N 1104 X 544 dot 92 X 69 mm 120 X 90 mm
USER user can set print size
• The image is not correctly printed depending on printing size.
USER ADJ (User Adjustment )
Function This menu is to display USER SIZE ADJ menu.
Press the RIGHT shift button to display USER SIZE ADJ menu .
“CHANGE : OK/CANCEL” is displayed on the lower position.
When selecting “OK” and pressing SET
SET
button, SYSTEM menu is displayed.
Note: When “H-POSI” is shifted to the minus direction at W (WIDE), the monitor screen may get darker.
PAGE INC ( Page Increment)
Function
Turn the memory page automatically.
Each time the MEMORY button is pressed, the memory page is turned automatically and the image is
stored in the memory on its page.
ON................ This function is available.
OFF .............. This function is not available.
LIVE SEL ( Live Select )
Function Switching the monitor display of input signal.
This is a function to select whether the image inputted is displayed as it is or the image adjusted its
image and quality by the unit is displayed.
ANA ( Analog ) .........The image inputted is displayed as it is.
DIG ( Digital ) ..........The image adjusted its image and quality is displayed.
Note: • If the characters of character generator is displayed on the monitor screen by setting “DISPLAY”
to ON, the source image is displayed even if “ANA” is selected.
• When set to “ANA” , the 75 external terminal is necessary. (e.g. monitor etc.)
[The 75 impedance switch on the rear panel is invalid.]