Filter
Top Products
Troubleshooting
6-2
9123-A2-GB20-10
July 2000
H
Physical Tests
—
Line Loopback
—
Payload Loopback
—
Repeater Loopback
—
Send Line Loopback
—
Data Channel Loopbacks on a Frame Relay Link
—
Send and Monitor Pattern Tests
—
DTE Loopback
H
IP Ping Test
H
Lamp Test
Problem Indicators
The unit provides a number of indicators to alert you to possible problems:
Indicators . . .
See . . .
LEDs
Viewing LEDs and Control Leads
and
LED Descriptions
in
Chapter 5,
Operation and Maintenance
, as well as the
user interface screen.
Main Menu
→
Status
→
Display LEDs and Control LEDs
Health and status
Health and Status Messages
in Chapter 5,
Operation and
Maintenance
.
Main Menu
→
Status
→
System and Test Status
Messages also appear at the bottom of any menu-driven
user interface screen.
Performance statistics
Performance Statistics
in Chapter 5,
Operation and
Maintenance
, to help you determine how long a problem
has existed.
Alarm conditions that will
generate an SNMP trap
Alarms
on page 6-7.
SNMP traps Appendix B,
SNMP MIBs and Traps, and RMON Alarm
Defaults
.
Traps supported include warm-start, authentication-failure,
enterprise-specific (those specific to the unit), link-up, and
link-down.