Filter
Top Products
Setting Up NetScout Manager Plus for FrameSaver Devices
8-9
9123-A2-GB20-10
July 2000
4. Click on the ... button to the right of indicated fields for a drop-down list from
which selections can be made. Minimally, configure the following fields:
Field
Select or Enter . . .
Domain User Defined
DLCI DLCI number for trap being assigned
Stats Type PARADYNE
Trap Variable Trap variable to be configured
Key1 The ifIndex for the frame relay logical interface is 1
Key2 DLCI number (same as DLCI above)
Type Absolute or Delta radio button
1
Rising, Falling, or Both radio button
2
Threshold Value that will trigger a trap.
1
Latency MIB variables should be Absolute; all others should be Delta.
2
Generally, Rising is selected.
5. Select the OK button (at the bottom of the screen) to add this alarm.
6. Repeat Steps 3 through 5 until all traps are configured for all DLCIs.
Refer to
Configuring Alarms in
the
NetScout Manager/Plus & NetScout Server
Administrator Guide
for additional information.