Configuration
3-33
9123-A2-GB20-10
July 2000
" Procedure
1. Select one of the following menu selection sequences:
Main Menu
→
Configuration
→
Time Slot Assignment
→
Sync Data Port Assignments
or
Main Menu
→
Easy Install
→
Time Slot Assignment Screen
(When Service Type is set to Leased Line.)
2. Select an interface in the Assign To field. A matrix of the current
cross-connect status of all time slots on the selected interface appears.
3. Move the cursor to the next time slot that can be edited (underlined). Use the
spacebar or type in the desired time slot to display its time slot assignment.
4. Repeat Step 3 until the synchronous data port is assigned to all desired
time slots.
5. S
ave the configuration.
Clearing Assignments
Clearing assignments sets all time slots to Unassgn (unassigned).
Main Menu
→
Configuration
→
Time Slot Assignment
→
Clear Assignments