38
Setting up the GUIDE Plus+
®
System
Below we'll tell you how to set up the GUIDE Plus+
®
System to suit your own particular needs
and how to install the external receiver (satellite receiver, .....) if you have one.
If the GUIDE Plus+
®
system has not been installed yet, the 'Setup' screen will appear and you
can start with the installation right now.
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Press the GUIDE/TV button on the remote control.
The 'Grid' screen will appear.
aA 'Setup screen' will appear
b The GUIDE Plus+
®
system was not completely installed or the installation
was interrupted (local post code was not entered). Select one of the
settings described in the next chapter and follow the instructions on the
screen.
Problem
3 Press P+ A . Select the setting 'Setup' with C . This setting is
located on the second page.
Home
SetupyoursystemtoreceiveGUIDEPlus+data.
Schedule Info Editor Setup
Setup
ViewDemo
4 Select one of the following options using P- B or P+ A and confirm
with OK .
'Setup' Installation of the GUIDE Plus+
®
system.
Continue reading in the next chapter.
'View Demo' At this point you will be introduced to the functions of the GUIDE Plus+
®
system.
This will be done using stored demo data.
If you start the demo, programmed recordings can be deleted.
By pressing OK during the presentation, you can proceed directly to the installation
of the GUIDE Plus+
®
system. Read the next section.
Setup Home
PressAorBtoselect.ThenpressOKtoconfirm.
Setup
Chooseitemtosetup:
Language English
Country UnitedKingdom
Postalcode XXXXX
Externalreceiver1 None
Externalreceiver2 None
Externalreceiver3 None
'Setup'
Check the data displayed on the screen. If necessary, you can change these. To do so, select the
corresponding line with P- B or P+ A .
'Language'
Here you can change the language for the on-screen menu.
1 Press OK .
2 Select the desired language using P- B or P+ A and confirm with
OK .
3 Press OK to return to the 'Setup' screen.
The GUIDE Plus+® System
