Filter
Top Products
Analog Output, Digital Output 59
• You also can set Analog Output
in the Menu Bar. See page 28.
Helpful Hint
Analog Output
If you connected the Recorder’s red and white AUDIO OUT jacks to a
Stereo or TV as shown on pages 12-15, adjust Analog Output.See if your
Stereo or TV is compatible with Dolby Surround.Then follow these steps
to make Analog Output match your Stereo or TV capabilities. You do not
need to do this if you used the COAX OUT or OPTICAL OUT jacks.
1
Press SYSTEM MENU. Press ; to select in the top left
corner of the Menu Bar at the top of the TV screen.
2
Press 9CH- repeatedly to select G, then press :.
3
Press 9CH- to select Analog output, then press :.
4
Press 8CH+ or 9CH- to select Stereo or Surround.
Press OK.
● Select Stereo to hear stereo sound.This will work with any equip-
ment that has right and left audio jacks (usually red and white).
● Select Surround if your audio equipment is compatible with Dolby
Surround. If it is, a Dolby Pro Logic logo may show on the system.
5
Press SYSTEM MENU to remove the menus.
W X Y Z a
1 2 1en off no off
Sound
Digital output
z
Analog output s Stereo L
Night mode Surround
r
~
STANDBY
REC/OTR
TIMER REC MODE PLAY MODE TV/DVD
MONITOR
•TV
DIM RETURN T/C
DISC MANAGER FSS SELECT
SUBTITLE
STOP TV VOLUME
PAUSESLOW
PLAY
AUDIO ANGLE ZOOM
GUIDE/TV
MUTECLEAR
`
CH
CH
-
CH
CH
+
OK
SYSTEM
DISC
DISC
Ç
H Gk
MENU
1-4
1,5
Digital Output
Adjust Digital Output if you used the Recorder’s COAX OUT or OPTI-
CAL OUT jacks to connect to a TV or Stereo. See page 16. If you used the
red/white AUDIO OUT jacks, adjust Analog output instead. See above.
1
Press SYSTEM MENU. Press ; to select in the top left
corner of the Menu Bar at the top of the TV screen.
2
Press 9CH- repeatedly to select G, then press :.
3
Digital output will be selected. Press :.
4
Press 8CH+ or 9CH- to select Off, PCM only, or All.
Press OK.
● Select All if you used the COAX OUT jack to connect the
Recorder to a Stereo that has a multi-channel decoder. See page 16.
● Select Off if you did not use either the COAX OUT or OPTICAL
OUT jack. See above to adjust Analog Output instead.
● Select PCM only if you used the COAX OUT or OPTICAL OUT
jack of the Recorder for connections, but the audio equipment does
not include a built-in digital multi-channel decoder.
5
Press SYSTEM MENU to remove the menus.
W X Y Z a
1 2 1en off no off
Sound
Digital output s Off
z
Analog output PCM only
K
L
Night mode All
r
~
STANDBY
REC/OTR
TIMER REC MODE PLAY MODE TV/DVD
MONITOR
•TV
DIM RETURN T/C
DISC MANAGER FSS SELECT
SUBTITLE
STOP TV VOLUME
PAUSESLOW
PLAY
AUDIO ANGLE ZOOM
GUIDE/TV
MUTECLEAR
`
CH
CH
-
CH
CH
+
OK
SYSTEM
DISC
DISC
Ç
H Gk
MENU
1-4
1,5