Filter
Top Products
21
What is the subtitle language?
The subtitles will be displayed in the language you select, provided this
language is available on the disc. If it is not available on the disc the fist
language on the DVD will be used instead.
7 Confirm with OK .
8 Select the desired screen format position using B or A .
Virgin mode
TV Shape
4:3 letterbox
4:3 panscan
16:9
Press OK to continue
O '4:3 letterbox'
for a 'wide-screen' (cinema format) picture with black bars at
the top and bottom.
O '4:3 panscan'
for a full-height picture with the sides trimmed.
O '16:9'
for a wide-screen TV set (screen edge ratio 16:9)
9 Confirm with OK .
0 Select the country of your residence with B or A .
O If your country does not appear, select 'Other'.
Virgin mode
Country
Austria
Belgium
Denmark
Finland
France
Press OK to continue
Why do I have to set the country?
To call up the specific settings for the respective country, you must first
install the country.
After the first installation you can set the country in the 'Setup' of the
GUIDE Plus+
®
System only.
A Confirm with OK .
P A screen appers with a message about the connection of the
aerial.
It can take some time before this screen appears. Please press
no button in the meantime.
B After you connect the aerial (or cable TV, satellite receiver, etc.)
to the DVD recorder, press OK .
P The automatic TV channel search starts.
Installation
Autom. search
Searching for TV channels
00 Channels found
Please wait
P 'WAIT' will appear on the display.
Wait until all available TV channels have been found. This can
take several minutes.
a No TV-Stations found yet?
b Select channel 1 on the TV set. Can you see the stored TV channel
on the TV set?
If not, check the cable connection from the aerial (aerial socket) to
the DVD recorder and to the TV set.
b Please have patience.
The DVD recorder searches the entire frequency range in order to
find and save the largest possible number of TV channels.
b If you have not connected an aerial, go through all the basic settings
right to the end and then, if you wish, start the automatic search (see
'Automatic TV station search').
P When the automatic TV channel search is complete, 'Autom.
search complete' will appear on the TV screen along with
the number of TV channels found.
P 'Time', 'Year', 'Month', 'Date' will then appear on the TV
screen. It can take some time before this screen appears.
Please press no button in the meantime.
Autom. search
Autom. search complete
00 Channels found
Time 20:01
Year 2003
Month 01
Date 01
To continue
Press OK
ENGLISH
Installation