Filter
Top Products
30
'Setup'
Setup Home
PressAorBtoselect.ThenpressOKtoconfirm.
Setup
Chooseitemtosetup:
Language English
Country UnitedKingdom
Postalcode XXXXX
Externalreceiver1 None
Externalreceiver2 None
Externalreceiver3 None
Check the data displayed on the screen. If necessary, you can change
these. To do so, select the corresponding line with B or A .
'Language'
Here you can change the language for the on-screen menu.
1 Press OK .
2 Select the desired language using B or A and confirm with
OK .
3 Press OK to return to the 'Setup' screen.
'Country'
Select the country you currently live from the list. The DVD recorder
needs this information to load the right channel list.
1 Press OK .
2 Select the country you live in using B or A and confirm with
OK .
3 Press OK to return to the 'Setup' screen.
'Postal code'
In order to adjust the GUIDE Plus+
®
system correctly, it is necessary
to know your current location with the TV channels available. Using
the local post code and the country, the DVD recorder can
automatically make the settings.
1 Press OK .
2 Choose the entry position using C , D . Select the local post
code of your location using A , B , or the number buttons
0..9 .
O Depending on the country you select, you can also enter
letters using B or A .
a I cannot enter a local post code
b You have selected a country in which none of the channels transmits
GUIDE Plus+
®
data yet.
3 Confirm the local post code with OK .
4 Press OK to return to the 'Setup' screen.
'External receiver 1'
O How you install the external receiver you will read in the next
chapter.
O If you have no external receiver connected, read the section
'Finalise set-up'.
Installation of the 'External receiver 1'
Setup Home
PressAorBtoselect.ThenpressOKtoconfirm.
Setup
Chooseitemtosetup:
Language English
Country UnitedKingdom
Postalcode XXXXX
Externalreceiver1 None
Externalreceiver2 None
Externalreceiver3 None
If you have connected an external receiver (satellite receiver, set-top
box, cable TV box), you must also install it in the GUIDE Plus+
®
system. TV programmes (TV channels) that you can only watch via the
receiver can also be displayed in the GUIDE Plus+
®
system and be
programmed for recording.
You can connect up to three external receivers to the DVD-Recorder.
1 Select with B or A in the 'Setup'screen the line 'External
receiver 1' and confirm with OK .
2 Read the information on the screen and confirm with OK .
3 Select the type of the external receiver. This setting serves to
preselect the type used.
Which types can I choose?
This selection depends on the country and the GUIDE Plus+
®
system
provider. Therefore, some types may have no function.
'Cable': Cable receiver, cable box.
'Satellite': Analogue or digital satellite receiver.
'Terrestrial': Digital terrestrial decoder box.
'None': No external device connected.
4 Confirm with OK .
If you selected 'None', there is nothing further you need to do
here. Read on in the section entitled 'Continue set-up'.
Otherwise, you should continue here.
5 Select your provider from the list.
O If you do not have a provider, select 'No provider'
6 Confirm with OK .
7 Select the brand of your external receiver from the list. If,
additionally your provider is printed on your receiver (e.g. Sky,...),
you must choose the provider as brand.
O Depending on the type and provider you selected, a limited
selection will appear.
The GUIDE Plus+® System