Filter
Top Products
46
8 Enter the programme number of the TV channel using the number
buttons 0..9
Frequency VPS/PDC Home
,
Grid Search Schedule Info
/Record Freq. Timing
21-Oct 20:00 21:30 BBC1 Once +0
Selecting a TV channel from the listing
You can only use this function if data from the GUIDE Plus+
®
system is
already available.
- Press the yellow function button. You will see an overview of all
channels
- Select the TV channel you want to program using D , C , B , A .
You can browse back or forth using CHANNEL q ,
CHANNEL r .
- Confirm with OK .
Programme numbers of the scart sockets 'EXT1' and 'EXT2'
You can also program recordings from external sources.
- Select the corresponding input socket using B or A .'EXT1'
( EXT1 TO TV-I/O ), 'EXT2'(EXT2 AUX-I/O ).
- Confirm with OK .
Changes using the colour buttons
You can use the colour function buttons to make the following settings.
Make sure that the right tile is selected.
'Frequency': Green function button
'Once': single recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the
same day, e.g. Monday).
Activate VPS/PDC ('Timing'): Yellow function button
Using this button, you can activate
(appears) or deactivate ('VPS/PDC'
disappears) 'VPS/PDC' in tile
'Timing'
9 To find out how you can go back and change the data, read the
section on 'How to change or delete a programmed recording
(TIMER)'
If any of the TIMER blocks are in use, 'TIMER' will light up on the
recorder display.
How to change or delete a
programmed recording (TIMER)
Preparation:
•) The TV set is switched on, and, if necessary, the programme number for the
DVD recorder has been selected.
•) the DVD recorder is switched on.
1 Press TIMER s on the remote control while the DVD recorder
is switched on.
P The 'Schedule' screen will appear.
Frequency VPS/PDC Home
,Singlerecording
Grid Search Schedule Info
/Record Freq. Timing
21-Oct 20:00 21:30 BBC1 Once +0
21-Oct Matrix Once 0
2 Use B or A to select the programmed recording you want to
change or delete.
Depending on the programming method (using GUIDE Plus+
®
system, with/without ShowView
®
system), it is not possible to
carry out certain changes using the function buttons. Therefore,
always check the function of the corresponding button (description
in the colour field) before pressing the button.
Delete programmed recording
Press the red action button in the left tile.
Changing the TV channel
You can make this change only for recordings that were not set using
the 'Grid' screen.
In the case of recordings using the 'Grid' screen, centre tile is not
available.
- Select the centre tile with C .
- Press the yellow function button.
- Select the TV channel you want using B , A , D , C . Sender.
- Confirm with OK .
Activate VPS/PDC
Keep pressing the yellow function button in the right tile until
'VPS/PDC' appears in the 'Timing' line instead of the time.
If you programm a recording using the GUIDE Plus+
®
System, the
VPS/PDC time will be taken automatically. VPS/PDC can be switched
on or off without readjusting the start time.
Setting up repeat recordings
You can choose from the following settings in the right tile using the
green function button:
'Frequency' :'Once': Once recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the
same day, e.g. Monday).
Programming a recording (TIMER)